You’ve probably seen plenty of “smart home” products out there. Sure, they look cool with all their fancy features, but let’s be honest—they usually come with complicated setups and need a top-notch home network. For most of us who aren’t tech wizards or electricians, that’s just way too much hassle.

That’s where Smart+ comes in. It’s designed to make your life easier, not harder. It’s the only system that combines effortless setup, wireless freedom, and seamless synchronization—all in one.

No drilling, no mess. Every light and sensor comes with strong adhesive backing, so even if you’re not a DIY expert, you can handle it.

Pairing the lights and sensors? Super simple. No apps, no Wi-Fi, no headaches. Using state-of-the-art wireless technology, every sensor “talks” to every paired light, letting them turn on or off automatically when needed.

And the best part? The sensor doubles as a remote, so you can adjust the brightness, color temperature, and other settings for all your lights at once.

It’s smart lighting made for real people, not tech pros.

Absolutely! Here’s how it works: in the Smart+ system, each sensor acts like the “leader” of its group. That sensor controls all the paired lights in its team. This means you can set up different sensors and lights for every room in your home. For example, in your kitchen, you can pair a hand sensor with all the Smart+ lights, so a simple wave of your hand lights up the entire space. Within 66ft (20m), every light listens to the sensor’s commands.

And even in the same space, you can have multiple sensors working with different lights. Back to the kitchen example—you also can add door sensors in your cabinets, paired with Everywhere Lights, so when you open a cabinet door, the light inside turns on automatically.

The best part? You’re in complete control. Mix and match sensors and lights however you like—it’s all up to you!

In short, Halo Lux is your go-to for accent lighting, Lightstrip is ideal for high-traffic, bright areas, and Everywhere Light is the all-rounder for anywhere you want a quick lighting boost. Here’s how they’re different:

Power Source:

Hand Sensor:
A simple hand wave brings light, and it stays lit until you wave again. Like a regular switch – even with messy hands!

Motion Sensor:
Instantly lights up on detecting movement within 66ft (20m); when no motion is detected, it will gently dim after the duration you have set.

Door Sensor:
Open the door and the light instantly illuminates; close it, and the light automatically shuts off.

Nope! You don’t need to download any apps or deal with tricky setups. After a simple pairing process, our sensors communicate directly with the paired lights in real-time, no matter your home’s network situation. Even if you’re in a no-Wi-Fi zone (hello, pre-internet days!), Smart+ lights work perfectly.

Absolutely! Each Smart+ Sensor can control and adjust all its paired lights, including setting color temperature and brightness levels.

Moreover, if you're using the Motion Sensor, you can decide how long it stays on after detecting motion – choose from a quick 30 seconds, a full minute, or a leisurely 2 minutes.

And our Hand Sensor comes with a handy timer function, which you can set to 10, 20, or 30 minutes.

Yes, you can set the continuous lighting mode on all 3 sensors. Each of them has both auto mode and always-on mode.

The light and Smart+ Sensor are sold individually. It's a bit like picking your favorite duo in a game – the sensor's needed for the lights to shine bright, but this gives you the freedom to set up your lighting just the way you like it at home!

One sensor can pair with multiple lights that are within 66ft / 20m. And we suggest pairing with no more than 10 lights.

Each light can only be paired with one sensor at a time. You can pick from a Door Sensor, a Hand Sensor, or a Motion Sensor — choose one that best fits your needs. If you want to switch up the sensor, you'll have to disconnect the previous sensor and start a new pairing.

No problem at all! All our lights feature a peel-and-stick design, so you can easily move them. Just grab an extra install package, and you’re good to go.

And if you want to pair the lights with a new sensor for a different area, that’s easy too. Simply unpair them from the original sensor, pair them with the new one, and they’ll be ready to light up your new space. It’s flexible lighting, designed to move with you!

Definitely! The Smart+ Halo Lux can easily pop off its magnetic wall mount and be set on its Desk Lamp Stand (sold separately). With flexible angles, it provides precise lighting for tasks like reading, working, or studying.

We proudly offer a 30-day money-back guarantee and a 1-year warranty. So, go ahead and give it a try without any worries!