They might look similar in pictures... but it’s all about the light quality.

1. A glow that’s actually beautiful.
Those other lightstrips? They often look cheap with uneven, dotted lighting. Ours doesn’t. Thanks to COB (Chip-on-Board) technology, you get a smooth, seamless, spotless glow that makes any space feel warm and inviting.

2. Brighter and better.
With almost 10x more LEDs per meter (680 vs. around 60 on the cheap ones), our lightstrip delivers brighter, more even lighting. It’s the difference between soft, professional-quality light and something you’d rather keep hidden.

3. Syncs perfectly with your smart home.
Pair it with our Smart+ sensors, and it becomes part of your home’s smart+ lighting system. This means your lights can sync up and turn on or off automatically, making life just that much easier.

4. Installation? Plug it in and stick it up.
No messy wiring, no drills, no stress. Just plug it into any outlet, use the included Nano Adhesive Clips, and you’re good to go. Need more length? Snap on extensions up to 23 feet (7m). Want it shorter? Trim it to fit your space perfectly.

Both the kit and extension include the lightstrip and all the installation accessories for the chosen length.

The key difference? The kit comes with a PowerControl Hub and Power Cable, while the extension doesn’t include these.

The PowerControl Hub powers the lightstrip and allows it to communicate with the Smart Sensor. Without it, the lightstrip won’t light up or pair with a sensor.

If you’re adding lightstrips in the same area, you can buy extensions to make the lightstrip longer. But if you’re installing lightstrips in different areas, and you want them to work with separate sensors, you’ll need a separate kit for each location.

In the Smart+ system, each sensor acts like the “leader” of its group. That sensor controls all the paired lights in its team. This means you can set up different sensors and lights for every room in your home.

For example, in your kitchen, you can pair a hand sensor with all the Smart+ lights, so a simple wave of your hand lights up the entire space. Within 66ft (20m), every light listens to the sensor’s commands.

And even in the same space, you can have multiple sensors working with different lights. Back to the kitchen example—you also can add door sensors in your cabinets, paired with Everywhere Lights, so when you open a cabinet door, the light inside turns on automatically.

The best part? You’re in complete control. Mix and match sensors and lights however you like—it’s all up to you!

You can easily extend the lightstrip by snapping on extensions. For optimal performance, we recommend keeping the total length within 32.8 feet (10 meters) to avoid any noticeable brightness variation between the start and end of the strip.

Need a custom fit? Just trim the lightstrip to your ideal length in 1.2” (3 cm) increments. Note: Once the lightstrip is trimmed, it can no longer be extended with additional extensions.

Want a step-by-step video? Click here to check out our help page!

It’s not about the number of extensions but the total length. You can extend the lightstrip up to 32.8 feet (10 meters) by snapping on extensions. Beyond this length, brightness differences between the start and end of the strip may become more noticeable. For the best experience, we recommend staying within this limit.

Yep! The lightstrip itself is IP44-rated, so it’s totally fine with dust and the occasional splash. Even the extension connections are built to handle it.

Just keep in mind that the PowerControl Hub and the power cable connecting it to the strip aren’t waterproof—so as long as those stay dry, you’re good to go!

That means it’s great for kitchens and bathrooms where a little water might be around—just be sure to keep the power source out of harm’s way.

Yes! This lightstrip is fully compatible with other Smart+ lights. When connected within the active range of a single sensor, all lights in the system will share the same activation and light settings, creating a seamless and synchronized lighting experience. Cool, right?

Not at all! Our Smart+ lights are a breeze to set up. You don't have to wrangle with apps or any complex setups – like some of those brain-bending smart home appliances. With Smart+ lights, you simply choose a Smart+ Sensor that fits your lighting area, pair it up with your Smart+ Halo Lux, and voilà! Lighting made easy!

Of course! With the PowerControl Hub, it’s super easy to customize your lightstrip. You can adjust the color temperature, tweak the brightness, and create the perfect vibe for any moment.

And here’s the fun part: you can switch between different modes. Feeling zen? Try Breathing Light for a gentle, pulsing glow—perfect for yoga or just unwinding. Hosting a party? Turn on Music Syncing Mode and let the lights groove to your playlist.

If you’ve got the Smart+ Sensor, it gets even better. You can sync all your paired lights and control their settings in one go—so simple!

The light and Smart+ Sensor are sold individually. It's a bit like picking your favorite duo in a game – the sensor's needed for the lights to shine bright, but this gives you the freedom to set up your lighting just the way you like it at home!

One sensor can pair with multiple Smart+ lights, including Everywhere Light, Halo Lux, and lightstrips connected via PowerControl Hubs, as long as they are within a 66ft / 20m range. For the best results, we recommend pairing up to 10 lights to ensure a seamless experience.

Each light can only be paired with one sensor at a time. You can pick from a Door Sensor, a Hand Sensor, or a Motion Sensor — choose one that best fits your needs. If you want to switch up the sensor, you'll have to disconnect the previous sensor and start a new pairing.

We proudly offer a 30-day money-back guarantee and a 1-year warranty. So, go ahead and give it a try without any worries!