Cart
Your cart is empty
Installation Tips:
1. Before installation, please make sure the light is switched on.
2. Test the light by covering the solar panel (to simulate darkness), and press the button to switch between 3 modes in the following order: low, medium, high.
3. Install the light in the early morning to ensure maximum charge before use.
4. Pick a suitable location with direct sunlight, avoid shady areas like under roofs or trees.
1. Install the stake into the ground with two hands to avoid breaking it.
2. Once it's installed, adjust the angle for optimal lighting direction.
1. Drill 2 holes in the wall.
2. Insert the drywall anchors into the holes, and fix the light with the screws.
3. Once it's installed, adjust the angle for optimal lighting direction.
1. Install the stake into the ground with two hands to avoid breaking it.
2. Once it's installed, adjust the angle for optimal lighting direction.
1. Drill 2 holes in the wall.
2. Insert the drywall anchors into the holes, and fix the light with the screws.
3. Once it's installed, adjust the angle for optimal lighting direction.
The battery performance is affected by the brightness level of the light, typically around 8-30 hours. Under any mode, the light should be able to work throughout the night if the battery is sufficiently charged in the daytime.
Under Low Light, the battery could last for 30 hours in a full charge.
Under Medium Light, the battery could last for 16 hours in a full charge.
Under High Light, the battery could last for 8 hours in a full charge.
Yes. Although the light is designed to operate automatically so that you don't have to manage it on a daily basis, there's a light switch at the back to completely turn off the light. You can also use it to adjust the brightness level.
The light is designed to stay on continuously in the dark to maximize safety. There's no motion detection mode on this light.
Please make sure the light is switched on before charging the light. There's a button at the back which controls brightness level and switch off 1) Low, 2) Medium, 3) High, 4) Off.
To switch it on, select your desired brightness level. We recommend you use the button in a dark place so that you can see its indications.
Yes, the working temperature of the light is -22~140°F (-30~60°C). It's waterproof, heat-resistant and frost-resistant. It can be used in all 4 seasons.
And please kindly note that due to the solar charging feature, the working hour in winter is shorter than that in summer, as the sunlight it can receive in winter is relatively shorter. We recommend you try to move the lighting spot where there will be more sunlight to maximize its efficiency.
