GlowRight Outdoor Guardian Light 3.0 Plus

Installations, Tips and FAQs

What's in the box

1. Outdoor Guardian Light 3.0 Plus x1

2. No Drill Tapes x2

3. Drywall Anchors & Screws x2

Step by Step Installations

Please note:

*Install the light at where the solar panel gets direct sunlight without any shelter.

*Install the light ideally within 26ft (8m) above the floor for better motion detection performance.

*The light must be turned on in order to charge under the sun. Please make sure it is switched on after installation.

Recommended for: flat surface including concrete wall, timber wall, metal wall.

Place the double-sided tapes* on the back of the light.

*The double-sided tapes are water-resistant that are designed for outdoor use. It can securely hold the light under any weather conditions.)

Peel off the adhesive backing and stick the light on the wall.

Recommended for: uneven surface including brick wall, stone wall.

Measure and mark hole spacing. Drill holes in the wall. Insert raw plugs and push in firmly.

Install the light by inserting the Screws.

Method 1 - No Drill Tapes

Recommended for: flat surface including concrete wall, timber wall, metal wall.

Place the double-sided tapes* on the back of the light.

*The double-sided tapes are water-resistant that are designed for outdoor use. It can securely hold the light under any weather conditions.)

Peel off the adhesive backing and stick the light on the wall.

Method 2 - Drill & Screws

Measure and mark hole spacing. Drill holes in the wall. Insert raw plugs and push in firmly.

Install the light by inserting the Screws.

How to use it?

1. Press the Power button to switch on the light.

2. Press the Mode button to choose lighting modes.

1

Motion Color Mode
Low Colored Light → Bright White Light

2

Motion White Mode
Low White Light → Bright White Light  

3

Motion Energy Mode
Dark → Bright White Light

4

Stay-On White Mode
Stay on a White Light throughout the night.

5

Stay-On Color Mode
Stay on a Colored Light throughout the night.

Remove the insulator to activate the remote control.

Method 1 - Buttons On the Light

1. Press the Power button to switch on the light.

2. Press the Mode button to choose lighting modes.

1

Motion Color Mode
Low Colored Light → Bright White Light

2

Motion White Mode
Low White Light → Bright White Light  

3

Motion Energy Mode
Dark → Bright White Light

4

Stay-On White Mode
Stay on a White Light throughout the night.

5

Stay-On Color Mode
Stay on a Colored Light throughout the night.

Method 2 - Remote Control

Remove the insulator to activate the remote control.

Frequently Asked Questions

How long does it take to fully charge the light?

It could last for months of use depending on how often you activate the light.

With an average of 8 activations a night, a full solar panel charge can last up to 20 days on Motion Mode, 25 days on Motion Energy Mode, and 36 hours on Stay On Mode.

How long does the battery last?

You can set the light on continuous lighting or only activates with motion.

  1. Motion Color Mode: A Low Colored Light lights up at dusk, turn into a Bright White Light when motion is detected.
  2. Motion White Mode: A Low White Light lights up at dusk, turn into a Bright White Light when motion is detected.
  3. Motion Energy Mode: Only activates a Bright White Light when motion is detected.
  4. Stay-On White Mode: Stay on a White Light throughout the night.
  5. Stay-On Color Mode: Stay on a Colored Light throughout the night.

Does it only charge in direct sunlight? What about cloudy days?

The light works best through charging up by receiving direct sunlight.

It can still charge up in cloudy weather, but it could affect how much the light will charge as the cloud will not permit as much light through.

When the light receives less energy, the brightness level could go down in order to support the lighting for a longer period of time.

Can l install the light at where there is a shade covers up?

With a shade covering up the solar panel, the light will not receive as much sunlight.

For best performance, we recommend you to install the light at a place with no shades or cover in order to get the most out of the sunlight.