Outdoor Solar Guardian Light 2.0

Installations, Tips and FAQs

Whats in the box

1. Solar Guardian Light 2.0 x1

2. Glue x1

3. Hooks x1

4. Drywall Anchors & Screws x1

Step by Step Installations

Please note:

*Install the light at where the solar panel gets direct sunlight without any shelter.

*Install the light ideally within 26ft (8m) above the floor for better motion detection performance.

*The light must be turned on in order to charge under the sun. Please make sure it is switched on after installation.

Recommended for: flat surface including concrete wall, timber wall, metal wall.

Remove the sticker on the back of the hook and apply the glue, fill in any uneven surface on the wall if necessary to make sure it’s flat for sticking.

Leave dry for 12 hours with the temporary sticker to fix the position.

Hang on the light. Turn it on, switch to your desired mode, and begin to charge in the sun.

Recommended for: uneven surface including brick wall, stone wall.

Drill a hole on the surface.

Insert the drywall anchor into the hole, and fix the light by the screw and the sticky pad.

Turn on the light and switch to your desired mode. It begins to charge in the sun!

Method 1 - No Drill Hooks

Recommended for: flat surface including concrete wall, timber wall, metal wall.

Remove the sticker on the back of the hook and apply the glue, fill in any uneven surface on the wall if necessary to make sure it’s flat for sticking.

Leave dry for 12 hours with the temporary sticker to fix the position.

Hang on the light. Turn it on, switch to your desired mode, and begin to charge in the sun.

Method 2 - Drill & Screws

Recommended for: uneven surface including brick wall, stone wall.

Drill a hole on the surface.

Insert the drywall anchor into the hole, and fix the light by the screw and the sticky pad.

Turn on the light and switch to your desired mode. It begins to charge in the sun!

3 Lighting Modes

The outdoor light can be activated in two ways, brightness detector and motion detector, offering 3 different modes for all your needs. All you have to do is press the button.

i. Stay On Night Mode

i. Stay On Night Mode

Automatically turn on at dusk.Automatically turn off at dawn.

Recommended use for backyard, fence, garden bed.

ii. 30s Motion Mode

ii. 30s Motion Mode

Automatically turn on by motion. Automatically turn off after 30 seconds.

Recommended use for Entrance, Pathways, Trash Can

iii. 60s Motion Mode

iii. 60s Motion Mode

Automatically turn on by motion. Automatically turn off after 60 seconds.

Recommended use for Entrance, Driveways, Backyard

Frequently Asked Questions

How long does it take to fully charge the light?

A full charge takes around 8 hours under direct sunlight. It should charge up fully during daytime.

How long does the battery last?

Upon a full charge, the battery could last for around 3 days under Motion Mode depending on the lighting duration and how often it is activated. That means if the light is able to charge during the day, it can still work for a few days under Motion Mode even the weather condition is bad for the next few days.

Under Stay On All Night Mode, it could last for 7-9 hours of use, which is long enough to go through the darkness at night.

How does the light know when to turn on?

It uses an advanced motion detection sensor to detect any movement nearby and activates the light.

Motion is activated from a very large range, 10-26 feet (3-8 metres) with 120 degrees angle of detection.

Therefore the light is more sensitive to movement and can be triggered promptly even if a kid, a dog, or a cat walks by.

How many do I need for my home?

The light is 750 lumens that cover around 1180 square feet.

We recommend putting at least one GlowRight Outdoor Guardian Light on each side of your home and one at each entrance point including the front door, back door, garage, shed for better protection and illumination.

How long is the lighting duration under motion mode?

There are two motion modes, 30s Motion Mode and 60s Motion Mode where you can choose from lighting for 30 seconds or 60 seconds.

If you are looking to increase visibility in the dark, you can set it on to the 60s Motion Mode. If you are looking to use it as a security light, 30s Motion Mode should be enough.

Is it only solar charging?

Yes. The outdoor light is designed to use with the lowest maintenance possible, it doesn't require battery changing or USB recharging.

Does it only charge in direct sunlight? What about cloudy days?

The light works best through charging up by receiving direct sunlight. The more sunlight received, the longer it will stay on at night.

It will still charge up in cloudy weather, but it could affect how much the light will charge as the cloud will not permit as much light through.

When the light receives less energy, it will impact on the illuminating length and brightness of the light.

Can I install the light at where there is a shade covers up?

With a shade covering up the solar panel, the light will not receive as much sunlight.

For best performance, we recommend you to install the light at a place with no shades or cover in order to get the most out of the sunlight.

Does it stay on throughout the night or only switch on when motion is detected?

It does both!

There are 3 lighting modes you can choose from:

1. Stay On All Night Mode

2. 30s Motion Mode - triggered by motion and automatically turns on the light for 30 seconds.

3. 60s Motion Mode - triggered by motion and automatically turns on the light for 1 mintue.

Does it have an on/off switch?

There's only one button you can use to turn the light on/off and switch between 3 modes.

You'll also find 3 Mode Indicator Lights on the right corner that tells you which lighting mode you're currently using.

Join GlowRight VIP list & Get 10% off your first order!