1. Stick the magnet on the back of the light.
2. Stick the metal plate on the surface you want to install the light.
3. Finally, place the light on the surface.
Glowright Indoor Everywhere Night Light
Installations, Tips and FAQs
Whats in the box
1. Indoor Everywhere Light 2.0 x1
2. Remote Control x1
3. USB Cable x1
4. Metal Plate x1
5. Magnet x1
Step by Step Installations
Frequently Asked Questions
What is the motion detection range?
The motion detector is very sensitive to movements. It has a detection range within 16ft (5m) and 120°.
How long would a full charge last for?
Depending on the lighting mode and how often you use the light, it can last for 30-50 days of use.
Under motion mode, will it switch off automatically?
Yes, the light will switch off automatically after 30 seconds.
I’m getting multiple lights, can I control them together with one remote?
Yes absolutely! If you have multiple lights installed, you only need one remote control to use the lights.
Can I adjust the brightness of the light?
Yes, the light is dimmable to 5 levels of brightness.
Can I use the light on a stainless steel surface like refrigerators?
Yes. As long as you have the magnet stuck on the light, it can stick to any strong metal surface like refrigerators, dishwashers, and metal shelving.
Under motion mode, will it turn on during daytime even it’s bright enough?
No, the motion dectector only activates in the dark. So it will not waste any uneccesary energy.